|
Home : Fluid Power Pumps : FP150
Fluid Power Pumps
FP150 Chemical Injection Pump
System Description
The Hammonds FP150 offers the ability to
inject single or dual chemicals into process
streams with flow rates of 10-75gpm.
The FP (Fluid Powered) pump is perfect
for applications that must inject bleach or
other chemicals but have no power available.
The FP150 is powered by the water moving
through the Hammonds fluid motor
resulting in the injection of bleach or other
liquid additives in proportion to flow without
the requirement of external power.
The FP150 is passive, meaning it automatically
starts and stops any time flow is
present in the system.
NO VALVES TO LEAK!
SPECIFICATIONS
- Flooded suction required
- Number of additives: 1 Standard, Up to 2 Optional
- 1-1/2” Sch 80 PVC pipe connections standard
(other connections available, consult factory for
- Injection ratios: 0-1000 PPM depending upon application
- 10-40 GPM continuous operation
- 10-75 GPM intermittent operation with optional gear
- Product temperature range:- -40 -- +250 F
- Maximum product line pressure: 50 PSI (consult factory for line pressure greater than 50 PSI)
Download a Specifications Sheet for the FP-150 >> (PDF - 452 kb)
MATERIALS OF CONSTRUCTION:
- Fluid motor: PVC
- Fluid motor shaft: 300 series stainless steel
- Metering pump: All wetted parts ceramic and HDPE plastic (other materials available - consult factory)
- Mechanical Seal: Carbon on ceramic
- Product viscosities: To 10,000 SSU
- Chemicals: bleach and other water treatment chemicals
- Duty cycle: Intermittent
Download Technical Drawings for the FP-150 >> (PDF - 244 kb)
|
